top of page
Knowledge Center / Mortgage pricing

Dated illustrative pricing

How mortgage pricing works

A DRG Mortgage guide to points and lender credits

A mortgage rate is connected to its upfront price. Paying discount points can buy a lower rate; a rate-based lender credit can reduce eligible closing costs in exchange for a higher rate. The useful choice depends on both the costs and how long the borrower expects to keep the loan.

This guide focuses on consumer home mortgages. The example below uses a hypothetical DRG Mortgage scenario priced on October 14, 2026. It shows how three choices compare within one scenario, rather than suggesting that one rate fits every borrower.

Dated DRG Mortgage pricing example

Scenario: $400,000 purchase price; $320,000 conventional loan; $80,000 down payment, or 20%; 30-year fixed rate with 360 monthly payments; 780 credit score; an Ohio primary-residence, single-family home. Pricing assumes a 30-day lock period, but no rate was locked for this hypothetical example.

Snapshot dated October 14, 2026. These are illustrative scenario terms, not a current offer or commitment to lend. Actual rates, payments, and costs could be higher. Obtain an official Loan Estimate before choosing a loan.

DRG Mortgage scenario: three rate and upfront-cost choices
Option Interest rate Annual percentage rate (APR) Points or lender credit Quote-displayed monthly principal and interest
A: Pay points 7.625% 7.744% $2,080 paid
0.650 points
$2,264.94
B: Near zero points 7.750% 7.807% $140.80 paid
0.044 points
$2,292.52
C: Receive a credit 7.875% 7.897% $950.40 credit
0.297% of the loan
$2,320.23

Payments shown exclude property taxes and homeowners-insurance premiums; the actual total payment will be higher. Mortgage insurance is $0 in this scenario. Each option is a fully amortizing fixed-rate loan over 360 monthly payments, subject to final-payment rounding. APRs are reproduced from the dated scenario disclosures; they are not calculated from the points alone.

The quoted payments are shown as captured. A separate standard amortization calculation rounds Option C to $2,320.22, one cent below its displayed quote. The holding-period model below uses unrounded calculated payments; the payment-only comparisons use the displayed quote amounts.

Why the middle option is near zero

Option B is close to a zero-point reference, but it still charges $140.80, or 0.044 points. It is not an exact zero-point, zero-credit option. That distinction matters: moving from B to A adds $1,939.20 upfront, while moving from B to C improves the upfront position by $1,091.20, not merely the amount of C’s credit.

One discount point equals 1% of the loan amount . The rate reduction purchased by a point varies. Even an exact zero-point loan can have origination, appraisal, title, prepaid-interest, and escrow costs. Zero points does not mean zero closing costs .

Read the fee subtotal carefully

The scenario shows $5,757.85 of other fees held constant across these choices, including an optional owner’s title policy. Adding the points or subtracting the credit produces displayed fee subtotals of $7,837.85 for A, $5,898.65 for B, and $4,807.45 for C.

Those subtotals exclude prepaids and initial escrow funding. They are not complete closing-cost totals or cash to close, and no full Loan Estimate was generated for this example. Cash to close also reflects the down payment, deposits, applicable credits, and other adjustments.

Compare the upfront difference with the payment difference

A simple payment-only break-even divides the extra upfront cost by the monthly principal-and-interest reduction. The table compares pairs of options using the quote-displayed payments above. It does not count taxes or insurance estimates as loan savings.

Simple cash-flow comparison using the displayed quote payments
Choose the lower-rate option Extra upfront cost Monthly principal-and-interest reduction Payment-only break-even
A instead of B $1,939.20 $27.58 70.3 months
B instead of C $1,091.20 $27.71 39.4 months
A instead of C $3,030.40 $55.29 54.8 months

For example, choosing B instead of C means giving up C’s credit and paying B’s small points charge. The resulting $1,091.20 difference is recovered through $27.71 lower monthly principal and interest after about 39.4 months. The 40th payment is the first whole-payment crossover on that cash-flow measure.

This shortcut leaves out changes in principal repayment. To compare borrowing cost over a holding period, consider interest plus net loan costs and any mortgage insurance. Show the remaining debt separately; principal repaid is not an additional borrowing charge.

Compare two, five, and seven years

This independent model uses the same $320,000 principal and the rates in the dated grid. The cost measure is interest paid plus points, minus the lender credit once. Common fees are omitted because they are equal across options; mortgage insurance is $0. These are comparative model results, not total transaction costs.

Independent amortization model: cost and remaining debt shown separately
Measure A: Pay points B: Near zero points C: Receive a credit
24 months
Interest + points − credit
$50,454.25 $49,318.49 $49,030.85
24 months
Remaining principal
$314,015.69 $314,157.23 $314,295.92
60 months
Interest + points − credit
$121,123.99 $121,204.71 $122,134.31
60 months
Remaining principal
$303,147.59 $303,512.76 $303,871.39
84 months
Interest + points − credit
$166,731.39 $167,627.78 $169,374.04
84 months
Remaining principal
$294,396.43 $294,915.36 $295,425.79

At two years, C has the lowest modeled interest-plus-points/credit cost. At five years, A is slightly below B; by seven years, the gap is larger. A also leaves a smaller balance. These differences show why the lowest payment, the least cash upfront, and the lowest cost over a chosen period can point to different choices.

The model assumes equal monthly periods, a first payment one month after origination, on-time payments, and no extra principal payments. It retains full-precision level payments and balances until display rounding. Actual servicing can differ. It excludes time value, investment returns, tax effects, and any costs of a later refinance; refinancing is not guaranteed. If fees are financed, the changed loan balance must be modeled separately.

Separate wholesale par from the borrower’s price

Wholesale pricing may be expressed as a percentage of principal: 100 is par , above 100 is a premium, and below 100 is a discount. That convention does not identify a borrower’s zero-point rate by itself. Applicable loan adjustments and compensation treatment must be understood first.

The borrower-facing points and credits in this example are already net of the scenario’s lender-paid broker compensation: 2.5% of $320,000, or $8,000. That amount is accounted for in the pricing. It is not another $8,000 charge to add to the borrower’s fee subtotal, and subtracting it again would distort the displayed points or credit.

This compensation figure applies only to the illustrated scenario; arrangements and loan options can differ. Lender-paid compensation still has economic cost within the loan’s pricing; it should not be described as free.

A higher rate does not mean higher originator compensation

For covered consumer mortgages, federal rules prohibit loan originator compensation based on the interest rate or other loan terms. A permitted arrangement can use a fixed percentage of the loan amount . For the same principal in this scenario, the $8,000 compensation stays fixed across the rate choices.

For those loans, rules also restrict compensation from both the borrower and another party on the same transaction and prohibit certain steering for higher compensation. A change in the credit available to the borrower should not be confused with additional rate-based pay to the originator.

Check each pricing step instead of assuming more credit

The steps are uneven even in the three-row example. The first change in rate has a different upfront effect from the next. Points do not buy a universal, fixed rate reduction; the tradeoff varies with the loan and pricing conditions.

Elsewhere in the same snapshot, several successively higher-rate options carried the same lender credit. The credit stopped increasing while the principal-and-interest payment continued upward. Across that stretch, a higher rate provided no additional credit. That is a reason to compare every row rather than assume each increase buys more credit. The grid alone does not explain the plateau.

Use lender credits for eligible costs

A rate-based lender credit generally offsets eligible closing costs and prepaid expenses. It does not fund the down payment or required reserves. Fannie Mae’s lender-contribution rules specify those limits for loans subject to its guidance. Other programs have their own requirements.

A credit must be matched to costs it can cover. Any excess is handled under the applicable program and disclosure rules; it does not automatically become spending money. A separate grant or assistance program has different requirements.

Use complete written terms for an actual decision

For most consumer home mortgages, the Loan Estimate identifies points in the origination-charges section and lender credits in the closing-cost section. The scenario subtotal above is not a substitute for that document or its full cash-to-close calculation.

APR includes the interest rate and certain additional borrowing costs. Compare it for similar loans alongside cash to close, the complete monthly payment, and the period you expect to keep the mortgage. Confirm quote timing, rate-lock terms and expiration , and what changes if closing is delayed or loan details change.

By DRG Mortgage, LLC | NMLS #2657603

Dated hypothetical example for education. Rates and terms are not guaranteed or currently offered by this page. Actual rates, payments, and costs may be higher. An official Loan Estimate and final eligibility review are needed before choosing a loan.

Explore the details

Does the lowest mortgage rate always mean the lowest cost?

A lower rate can cost more overall when points and other upfront loan fees outweigh the interest savings during the time you keep the mortgage. Compare interest plus loan fees and mortgage insurance, minus any lender credits, over the time you expect to keep the loan.

Two quotes, same rate: why does one cost more?

Two offers can have the same interest rate and different borrowing costs. For most consumer home mortgages, the Loan Estimate helps separate loan charges from estimated taxes and insurance. Compare the same loan amount, product, term, property, rate-lock status, and lock period, using offers prepared at the same time.

A simple same-rate comparison

Imagine two fixed-rate estimates with the same loan amount, interest rate, and term. Estimate A charges discount points; Estimate B has no points. All other loan fees, mortgage insurance, and lender credits are equal. Their principal-and-interest payments match, but B costs less to borrow because it avoids the points charge. This is a hypothetical comparison, not a current offer.

Points reduce the rate relative to that lender's own zero-point option. Paying points does not establish that an offer is cheaper than another lender's offer at the same rate.

Now suppose A uses a lower property-tax estimate for escrow, making its total monthly payment look smaller. That estimate does not lower the actual tax bill . Ask both lenders to use consistent tax and homeowners-insurance assumptions before judging the payment difference.

Check these lines before choosing

  1. Origination charges : On page 2, Section A includes discount points and other origination charges. Compare the section total, not just a fee with a familiar name. Points are already included; do not add them again.
  2. Services and credits : Review Section B, Services You Cannot Shop For, and Section C, Services You Can Shop For. Section D totals A, B, and C. Then account for lender credits under Section J once. A larger credit may offset higher fees.
  3. Taxes and insurance : Check the Projected Payments section on page 1, then page 2 Sections F, Prepaids, and G, Initial Escrow Payment at Closing. Ask what explains different estimates, including the closing date and the insurance coverage assumed.
  4. Cash to close : Use the page 2 calculation to distinguish loan costs from the down payment, deposits, seller credits, and other adjustments. Lower cash to close alone does not prove a cheaper loan.

Before deciding, ask for the differences in writing : Which charges change the cost of borrowing, and which figures change only because the estimates or timing differ?

How to compare mortgage offers without being fooled by a lower payment

A smaller monthly payment can make a mortgage easier to manage. It can also hide an unequal comparison: more cash paid upfront, a longer repayment period, or an estimate that leaves out expenses you still owe. Before choosing, find out what produced the smaller number.

The goal is to answer two different questions: Can you comfortably carry the full housing payment, and what will the financing cost over the time you keep it? A difference between estimates may have a reasonable explanation. This guide focuses on consumer home mortgages and shows how to ask for it.

Check what you are borrowing and for how long

Check the loan amount, down payment, product, and repayment term. For the same purchase price, putting more money down means borrowing less. Financing fees increases the balance compared with paying those fees separately. Either can change the payment before the interest rate enters the comparison.

Longer terms generally lower the required payment but can increase total interest. An adjustable-rate loan can have a lower starting payment that changes later. Compare matching loan structures first; then examine alternatives as deliberate tradeoffs. The CFPB explains how term and rate type affect costs .

For a refinance, imagine replacing a partly repaid loan with a new loan that stretches repayment over a longer period. Some payment relief may come from spreading the debt out again. Ask for the payoff date and remaining balance at the same future date under both options, rather than treating the entire payment reduction as savings.

Separate the payment into its parts

On page 1 of the Loan Estimate, the Projected Payments section separates principal and interest, mortgage insurance, and estimated escrow. Principal reduces what you owe; interest is the charge for borrowing. Those two amounts alone do not describe the full monthly housing bill .

Mortgage insurance needs its own comparison. With conventional private mortgage insurance, a premium may be monthly, upfront, or a combination . A smaller monthly premium may come with more paid at closing. Ask what coverage arrangement each quote assumes, whether any premium is financed, and how long the charge is expected to continue under that loan’s rules.

Escrow collects money for expenses such as property taxes and homeowners insurance. If one offer has no escrow payment, those bills may simply be paid separately . Add them back into your household budget, along with applicable homeowners-association dues and other expenses outside the mortgage payment.

Make taxes and insurance comparable

A lower property-tax estimate does not lower the tax bill. A smaller homeowners-insurance estimate may reflect a different assumed premium rather than a better mortgage. Use the same property information and a comparable insurance policy, including coverage and deductible, to evaluate the estimates. The CFPB specifically warns against treating lower tax and insurance estimates as a better loan.

Ask where each figure came from and whether it has been checked. Also compare the expected closing date: prepaid interest and initial escrow funding can differ with timing. These amounts affect cash needed at closing even when they do not represent a difference in the lender’s origination charges.

Price the upfront tradeoff

Page 2 separates origination charges in Section A, required services in Sections B and C, and total loan costs in Section D. Discount points are included in Section A. Compare the total rather than adding points a second time or focusing on one fee label. Lender credits appear under Section J.

At the same lender, discount points can buy a lower rate with more money paid upfront. A rate-based lender credit makes the opposite tradeoff: less paid toward eligible closing costs in exchange for a higher rate. Ask to see a zero-point comparison and clarify whether a credit is tied to the rate or offered for another reason.

Then reconcile cash to close . That figure also includes the down payment and reflects deposits, seller credits, and other adjustments. A deposit already paid reduces the amount still due at closing without reducing the purchase price or the loan charges. Keep a separate view of how much cash each option leaves available afterward.

Use your likely holding period

Interest savings have more time to recover the cost of points when you keep the loan longer. A lender credit may be more useful over a shorter period. Ask for comparisons over a shorter period, your most likely period, and a longer one . A plan to refinance is an assumption, not an assured exit.

For each period, compare interest, loan fees, and mortgage-insurance costs, less applicable lender credits. Count each fee or credit once. If loan fees already include an upfront mortgage-insurance premium, do not add it again. Show the remaining principal balance separately. Principal repayment reduces debt ; adding the outstanding balance to an interest-only cost total would mix different measures.

For most consumer home mortgages, page 3 of the Loan Estimate offers a useful five-year check : subtract the principal paid off from the total paid shown in the Comparisons section. That separates principal repayment from the listed borrowing costs. These are projections; adjustable-rate results depend on rate assumptions. Ask for a tailored calculation if your expected timeline differs.

If fees are financed, include the larger starting balance and its interest cost without counting the fees twice. Also consider the value of keeping cash available for moving, repairs, or emergencies. The lowest modeled borrowing cost may require more upfront cash than fits your circumstances.

Use APR as a check and ask for the missing assumptions

Annual percentage rate, or APR , combines the interest rate with certain other borrowing costs into a yearly percentage. It helps compare similar loans, but it does not replace a full housing budget or a calculation for your expected holding period.

Before relying on a quote, ask:

  • Were these offers prepared at roughly the same time , using the same loan amount, property use, credit information, closing date, and comparable rate-lock periods ?
  • Which costs are paid now, financed, or left out of the stated monthly payment?
  • What changes later: the interest rate, mortgage-insurance charge, or estimated escrow payment?
  • Is the rate locked , when does the lock expire, and what could an extension cost?

Ask for revised written figures when the assumptions differ. A useful comparison shows the complete payment, cash required, borrowing cost over your timeline, and debt remaining. Then you can decide whether a lower payment reflects a worthwhile tradeoff for you.

Lender-paid versus borrower-paid compensation

A broker can be paid by the borrower or the lender . The label alone does not tell you which loan costs less. Compare the compensation, rate, credits, and other charges together, then confirm how the credits can actually be used.

DRG Mortgage hypothetical snapshot, October 14, 2026: $400,000 purchase, $320,000 conventional loan, $80,000/20% down, 780 credit score, Ohio primary single-family home, and a 30-day lock assumption. No rate was locked.

Both versions showed a 7.750% fixed interest rate, 7.807% annual percentage rate (APR), and $2,292.52 monthly principal and interest over 360 monthly payments, or 30 years, subject to final-payment rounding. Payments exclude taxes and homeowners insurance, so the total payment will be higher; mortgage insurance was $0.

The same compensation appeared in different places

  • Lender-paid: $8,000 broker compensation was already accounted for in pricing. The borrower-facing rate charge was $140.80, with no separate borrower-paid broker compensation to add.
  • Borrower-paid: the preview showed a separate $8,000 broker charge and a $7,859.20 rate credit. Across the transaction, $8,000 minus $7,859.20 leaves the same $140.80 before other fees.

The equal $8,000 amounts make this a controlled comparison. A separately negotiated borrower-paid fee may be lower. For covered consumer loans, that fee still cannot be based on the interest rate or a rate-dependent credit .

Both previews displayed a $5,898.65 fee subtotal. That excludes prepaids and initial escrow funding and is not cash to close. The matching arithmetic does not establish that the full credit can be used at closing.

Credit eligibility can change the result

The subtraction is an aggregate cost comparison, not permission to pay the broker’s fee with a lender credit. For covered consumer mortgages with borrower-paid originator compensation, creditor funds may cover other transaction costs, but not that compensation. The CFPB’s dual-compensation commentary makes this distinction explicit. A credit applied to other eligible costs can leave more of the borrower’s cash available for the broker fee.

Lender credits offset eligible costs; they are not unrestricted cash. For this conventional-loan context, the applicable lender-contribution rules also prohibit using them for the down payment or required reserves. Confirm enough eligible costs exist to use the intended credit.

Different compensation amounts, credit limits, fees, or quotes can change the economics. Ask for a complete Loan Estimate showing who pays each charge and where each credit applies. Neither compensation label automatically makes one option better.

Dated educational example, not a current offer. Actual rates, payments, and costs may be higher. Final eligibility, credit use, and disclosures require review.

Fee buyout versus financing fees

A fee can disappear from one line while its cost reappears elsewhere. Before treating a fee buyout as savings, check the full price of the loan.

This October 14, 2026 hypothetical comparison keeps the $320,000 loan amount, interest rate, repayment term, and other assumptions unchanged. It illustrates one fee-buyout structure; programs and pricing can differ.

Follow both sides of the change

  • Without the buyout: a $1,145 underwriting fee, a $140.80 pricing charge, and a $5,898.65 displayed fee subtotal.
  • With the buyout: a $0 underwriting fee, a $1,286.40 pricing charge, and a $5,899.25 displayed fee subtotal.

Removing the underwriting fee added $1,145.60 to pricing. The displayed fee subtotal increased by 60 cents. The cost moved categories rather than disappearing.

The added 0.358 pricing points equal 0.358% of the $320,000 loan amount: $1,145.60. Those points describe a pricing charge, not a 0.358-percentage-point increase in the mortgage interest rate. The CFPB notes that lenders sometimes use “points” for percentage-based fees even when the interest rate does not fall.

How financing fees works

Financing additional fees into principal means borrowing more to cover them, where loan rules allow. A larger balance can increase your payment and reduce your equity . You also pay interest on the extra amount borrowed.

Here, the balance stayed at $320,000 and the principal-and-interest payment stayed the same. The fee buyout did not roll fees into the loan balance. Nearly matching fee subtotals do not establish equal annual percentage rates (APRs).

Ask for the complete comparison

Ask for an itemized Loan Estimate : Which fee disappeared, which charge or credit changed, and did the amount borrowed change? Review APR and cash to close separately. The fee subtotals above exclude prepaids and initial escrow deposits; they are not cash to close.

Dated educational illustration, not a current offer. Actual costs and eligibility require review.

What a price adjustment means in dollars

A loan-level price adjustment , or LLPA, changes the price when a lender sells an eligible loan to Fannie Mae. The percentage describes a dollar adjustment to pricing. It does not specify how much your mortgage interest rate will change.

One difference translated into dollars

Loan-to-value (LTV) compares the loan amount with the property value used for underwriting. The September 30, 2026 matrix lists these purchase-loan adjustments for terms longer than 15 years and LTV ratios of 75.01%–80%:

  • Credit-score row of 780 or higher: 0.375%.
  • Credit-score row of 760–779: 0.625%.

Assume no waiver applies and everything else stays the same. The difference is 0.25 pricing points. On a $320,000 balance, 0.25% equals $800: $320,000 × 0.0025. The actual agency calculation uses the principal balance when Fannie Mae acquires the loan.

That $800 measures the difference in this agency-pricing component. It is not a guaranteed $800 borrower charge or a 0.25-percentage-point increase in the mortgage interest rate. The lender translates its costs into rate-and-fee options; the matrix provides no fixed conversion to your rate.

Check which adjustments actually apply

Applicable adjustments are cumulative . Use the correct loan-purpose table and add only adjustments for features the loan actually has, subject to the matrix’s exclusions. Do not add every row or combine purchase and refinance tables.

Conditional waivers include HomeReady loans and certain first-time homebuyer loans meeting income limits. The minimum-mortgage-insurance-coverage adjustment is an exception to these waivers when applicable. Check eligibility before using the example.

Ask your loan officer: Which adjustments apply to my loan? Do I qualify for a waiver? How do they affect the rate, points, and credits in my actual offer?

Educational example checked October 14, 2026, not a loan offer. The matrix and eligibility rules can change.

Sources

Read the primary sources used on this page

On this page

  1. Dated DRG Mortgage pricing example
  2. Why the middle option is near zero
  3. Read the fee subtotal carefully
  4. Compare the upfront difference with the payment difference
  5. Compare two, five, and seven years
  6. Separate wholesale par from the borrower’s price
  7. A higher rate does not mean higher originator compensation
  8. Check each pricing step instead of assuming more credit
  9. Use lender credits for eligible costs
  10. Use complete written terms for an actual decision
bottom of page